Introduction
The 1345s Quick-Release Propeller is an upgraded
propeller set for the Inspire 1, which enhances
reliability during flight.
Parts
1
Securing Spring
Quick-Release Propeller pair
M3×5.5 Screw
Mounting Plate
Propeller Safety
1. Always be sure to install the propellers onto the
correct motors, as indicated in this guide. Rotation
indicators are found on both the motors and
propellers, ensuring that the correct orientation
can be clearly determined. Be careful when
installing and removing the propellers.
2. The propeller set may show wear after continuous
use. Inspect the hooks inside the propeller nut
and mounting plate for wear, as shown below.
If you have trouble identifying signs of wear,
refer to Step 4 of the Installation section for more
information.
Be sure to replace the propeller and
the mounting plate if they have become worn.
Hook
Summary of Contents for 1345s
