A3-AG/N3-AG AGRICULTURE KIT 2.0
User Manual
44
©
2019 DJI All Rights Reserved.
Calibration Procedures
Choose an open space to carry out the following procedures.
1. Go to the app and tap Execute Operation to enter Operation View. Tap the System Status Bar
at the top of the screen and select Calibration in the Aircraft Status List, then follow the on-
screen instructions.
2. Hold the aircraft horizontally and rotate it 360 degrees around a vertical axis until the Aircraft
Status Indicators change to solid green and the display goes to the next step in the app.
3. Hold the aircraft vertically, with its nose pointing upward, and rotate it 360 degrees around a
vertical axis.
4. The Flight Status Indicator shows the current flight mode and the calibration page disappears
in the app when calibration is complete. If the Flight Status Indicator blinks red or a calibration
failure is displayed in the app, repeat the steps above to calibrate the compass.
When to Recalibrate
1. Compass data is abnormal, and the Flight Status Indicator is alternately blinking red and yellow.
2. Flying in a new location, or a location that is different from your last flight.
3. The mechanical structure of the aircraft has changed.
4. Severe drifting occurs in flight (e.g., the aircraft has difficulty flying in a straight line).