©2012 DJI Innovations. All Rights Reserved.
- 22 -
Joystick
Channel Mapping
Each control channel can be reversed, and mapped to one of the control functions listed in
corresponding drop down boxes.(Fig
①
)
These control function are „Roll‟, „Elevator‟, „Yaw‟&„Collective Pitch‟, they represent the cyclic and
rudder control of your aircraft. use helicopter for example, shown in the figures below(Fig
②
).
Where the „+‟ represents positive channel value, „-‟ represents negative channel value.
Push your joystick, and the channel value feedback will tell whether it matches with suggested
joystick control direction or your own settings, and then make your adjustments. For Type 1
controller, please refer to the controller‟s manual.
Fig①
Fig
①
Fig
②
