6
©
2018 DJI All Rights Reserved.
Function Descriptions
Basic Functions
Functions
Descriptions
UAV detection
Aeroscope detects UAVs flying within a given area and obtains
each aircraft’s broadcast GPS coordinates, flight altitude,
speed, orientation, model, serial number, and Home Point.
Then Aeroscope sends this information to the remote server for
processing and to the display in real-time.
Simple installation
The processor and antennas can be easily installed onto the rod.
Support aircraft
PHANTOM
TM
3 series
PHANTOM
TM
4 series
INSPIRE
TM
series
MAVIC
TM
series
SPARK
TM
MG-1P/T16/T20
MATRICE
TM
series
GPS
Aeroscope can detect its current position using its built-in GPS.
Remote OAM
A variety of OAM features are available when used with the
remote server, including firmware updating, resetting, status
inquiry, self-testing, parameter configuration, and more.
Environmental spectrum
detection
Aeroscope can scan for environmental interference and provide
a reference for installation.
Data security
Use certificate management and data encryption between the
equipment and remote server to ensure data reliability and
security.
Features
Features
Descriptions
Long-range detection
In an interference-free environment, signal reception range
may be vary when different antennas are used. When using the
omnidirectional antenna (3dBi), signal reception range can reach:
Over 7 km for Mavic
Over 5 km for Phantom series
Over 3 km for Spark
The signal reception range is about twice as much as the
omnidirectional antenna when using the low-gain directional
antenna (8dBi) and about four times when using the high-gain
directional antenna (16dBi).
Easy installation
Aeroscope can be installed and configured within half an hour.
Summary of Contents for Aeroscope AS-F1800
Page 1: ...2020 10 Aeroscope AS F1800 V2 0 User Manual...
Page 2: ......
