AGRAS MG-1 User Manual
© 2016 DJI. All Rights Reserved.
6
2. Prepare hose clamps A. Tools such as pincers may be required. Follow the instructions below to connect the other
end of the hose to the liquid pump.
Pull the hose through the hose clamp A and then connect it to the fitting of the liquid pump.
Open the hose clamp A by tools such as pincers. Move it to the fitting and release the hose clamp A to grip the
hose.
3. Prepare hose clamps B and M3x6 screws to fix the hoses to the arms and landing gear.
Open the hose clamp B to an appropriate angle to hold the hose. DO NOT damage the clamps.
Tighten one M3x6 screw to the hose bracket on the landing gear.
Tighten one M3x6 screw to the mounting hole on the bottom of the frame arm junction.
