©
2020
DJI All Rights Reserved.
3
EN
Disclaimer
Carefully read this entire document and all safe and lawful practices provided by DJI
TM
before using this
product for the first time. Failure to read and follow instructions and warnings may result in serious injury
to yourself or others, damage to your DJI product, or damage to other objects in the vicinity. By using
this product, you hereby signify that you have read this disclaimer carefully and that you understand
and agree to abide by all terms and conditions of this document and all relevant documents of this
product. You agree to use this product only for purposes that are proper. You agree that you are solely
responsible for your own conduct while using this product, and for any consequences thereof. DJI
accepts no liability for damage, injury, or any legal responsibility incurred directly or indirectly from the
use of this product.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. and its affiliated companies. Names of products,
brands, etc., appearing in this document are trademarks or registered trademarks of their respective
owner companies. This product and document are copyrighted by DJI with all rights reserved. No part
of this product or document shall be reproduced in any form without the prior written consent of or
authorization from DJI.
This disclaimer is available in various languages. In the event of divergence among different versions, the
English version shall prevail. The final interpretation of this document and all related documents of this
product belongs to DJI. This content is subject to change without prior notice. For up to date product
information, visit http://www.dji.com and click on the product page for this product.
Warnings
1. The MG Series Spreading System (abbreviated as Spreading System) is only compatible with the
DJI AGRAS
TM
MG series aircraft, and the firmware of the aircraft must be the correct version for
supporting the Spreading System. Refer to the Specifications section for more information about
compatible aircraft. DO NOT use it with other products or for purposes other than agriculture.
2. The Spreading System is compatible with dry materials of a diameter between 0.5 - 5 mm. DO
NOT use with other materials. Use with other materials will adversely affect operating results and
may damage the Spreading System. All materials must be used in strict accordance with the
instructions for those materials.
3. Internal spread tank load must not exceed 10 kg.
4. Use of a threadlocker is required during the installation process. Make sure that the threadlocker
is totally dry and solid before flight.
5. Make sure that the hopper gate and spinner disk function normally before each use.
6. Operate with caution to avoid injury caused by mechanical parts.
7. When spreading is in progress, maintain a safe distance from the Spreading System to avoid injury.
8. If spreading while a radar module is mounted, the minimum detection range of the radar module
will be increased from 1.5 m to 5 m due to obstruction from the materials being spread and the
radar module may incorrectly detect obstacles. Note that the aircraft cannot sense obstacles
that are not within the detection range. The detection performance of the radar module will also
decrease. Fly with caution. Refer to the disclaimer and safety guidelines of the corresponding
aircraft you are operating or the user guide of the radar module for more information on the radar
module.
9. DO NOT use liquids to rinse the Spreading System. It is recommended to use dry compressed
air as a cleaning agent.
