©
2017 DJI All Rights Reserved.
9
Remote Controller Operations
Button Types
Users can use the preconfigured buttons to control the aircraft and the camera and can also assign
functions to the customizable buttons through the DJI GO 4 app. There are three types of button:
1. Preconfigured buttons for aircraft control, e.g. the Pause Button, RTH Button, etc.
2. Preconfigured buttons for camera control, e.g. the Shutter Button, Recording Button, Focus
Adjustment Knob, etc.
3. Customizable buttons and knobs that you can set through the DJI GO 4 app.
Turning the Remote Controller On and Off
Follow the steps below to turn the remote controller on and off.
1. Press the power button once to check the current battery level. Charge the remote controller if
the battery is too low.
2. Next, press and hold the Power button to power on the remote controller.
3. Repeat step 2 to power off the remote controller after you finish using it.
Linking the Remote Controller
Linking is only required when using for the remote controller for the first time. Follow these steps to
link a remote controller:
1. Power on the remote controller, connect to your mobile device, and launch DJI GO 4.
2. Power on the aircraft.
3. Enter the Camera View and tap the Linking Remote Controller button shown below.
4. The DJI GO 4 app will display a countdown box, the remote controller will be ready to link, with
its display showing Connecting and a beeping sound being emitted.
