©
2014 DJI. All Rights Reserved.
13
Appendix
Appendix
Specifications
Hardware Requirement
Supported Flight Control System
A2
Supported Multi-rotor
S1000+,
S1000, S900
Mechanical and Electrical Features
Input Voltage
5 V
System Weight
550 g
Deployment Time
0.5 s
Minimal Deployment Altitude
6 m
System LED table
System LED
Remark
—
Solid green
System is ready.
—
Solid red
The trigger is not compressed.
Blinking red
The trigger is not compressed, and the remote controller
or flight controller safety function is active.
Blinking green
The trigger is compressed, and the remote controller or
flight controller safety function is active.
—
Solid green and red
Successful deployment.
Green and red blink
simultaneously
Signal not detected from the remote controller, and
abnormal flight controller signal.
×3
Green and red blink
simultaneously for 3 times
System powering on, and initialization test complete.
/
Alternating green and red
Signal not detected from the remote controller or flight
controller.
—
Solid green and blinking red The remote controller has been used within the nine
second safety countdown.
LEDs OFF
Powered off, or reset required.
