©
2014 DJI. All Rights Reserved.
5
System Introduction
System Introduction
System base serves as the major component for the DJI Dropsafe system. Features such as self-check,
stopping motors, triggering CO
2
canister are implemented by the system base and flight controller. Triggering
safety pin is in place to prevent users from accidently triggering the system. Parachute can be deployed in
less than 0.5 second.
System Base
[1] Connection Ports
[2] Triggering Housing Unit
[3] Initialization Button
[4] System LEDs
Connection Ports
Used to connect the DJI Dropsafe to a DJI flight controller and remote controller receiver.
Triggering Housing Unit
Houses the spring and triggering pin.
Initialization Button
Press the initialization button to put the system into the ready state.
System LEDs
The system LEDs indicate the system status. Refer to the table in the Appendix for LED definitions
[1]
[2]
[3]
[4]
Top View
