background image

©

 2014 DJI. All Rights Reserved. 

 

7

DJI DROPSAFE 

User Manual

Installing System Base

Setting Up the System Base for Deployment

Ensure the "activation switch" and "safety switch" on your remote controller are turned off. Ensure the 

spring and triggering pin are within the triggering housing unit. Follow the instructions below to set up the 

system base:

1.   Place the trigger compression tool into the triggering housing unit.   Use the supplied hex 

screwdriver to rotate the trigger compression tool clockwise for five times and then power on the on-
board battery. The LED indicators on system base will blink red and green for three times to indicate 
the system is functional.

3. Rotate the screwdriver to tighten the trigger compression tool until the system LED blinks solid 

green. Meanwhile, the other system LED will blink red for 9 seconds and then goes off.

Green system LED blinks solid.

Red system LED blinks for 9 secs.

×5

2. Press the initialization button to initialize the system. The system LED will blink solid red when the 

initialization is completed. If the system LED blinks red, it indicates the signal from remote controller 
or flight controller is abnormal. Ensure both the "activation switch" and "safety switch" on the remote 
controller are in the OFF position and that the parachute function of your flight controller is enabled.

Summary of Contents for Dropsafe















Reviews: