5)
Remove the front mounting screw with a screwdriver. To remove the rear mounting screw you will
need to open the battery compartment door and grip the black nut on the inside bottom of the craft.
While holding the nut with the pliers, unscrew the rear mounting screw.
Your Tarot gimbal can now be removed from the Phantom. The carbon fiber plate should also be
removed while flying your craft.
1. To reinstall the Tarot gimbal, reattach the carbon fiber plate.
2. Secure the gimbal by the front mounting screw. To screw in the rear mounting screw, hold the nut
in place with pliers while screwing through the bottom of the craft.
3. Reconnect the green and purple plugs to their original positions on the Tarot board.
4. Screw the board into its original position on the gimbal mount.
5. Plug in the power connector.
NEVER power up your craft with the gimbal attached WITHOUT a GoPro. Powering up your craft
with the gimbal attached and no gimbal can damage the Tarot gimbal.
Summary of Contents for DSLRPros Nighthawk Aerial Kit
Page 2: ......
