background image

2

 

©

 2015 DJI. All Rights Reserved. 

Read this disclaimer carefully before using FlameWheel 450. By using this product, you 
hereby agree to this disclaimer and signify that you have read them fully. FlameWheel 450 
is an excellent multi-rotor. With a good autopilot, it will even offer tremendous flight features 
for low altitude flight working in restricted space. Despite the controller of autopilot operates 
in the safest manner when the main power battery is connected, we strongly recommend 
customers to remove all propellers, use power supply from R/C system or flight pack battery, 
and keep children away during system calibration and parameter setup. Please respect 
the AMA’s National Model Aircraft Safety Code.Please install and use this product in strict 
accordance with the User Manual. SZ DJI Technology Co., Ltd. and its affiliated companies 
assume no liability for damage(s) or injuries incurred directly or indirectly from using, 
installing or refitting this product improperly, including but not limited to using non-designated 
accessories.
This device complies with part 15 of the FCC Rules.
DJI FLAME WHEEL is registered trademark of DJI Innovations. Names of product, brand, 
etc., appearing in this manual are trademarks or registered trademarks of their respective 
owner companies. This product and manual are copyrighted by DJI Innovations with all rights 
reserved. No part of this product or manual shall be reproduced in any form without the prior 
written consent or authorization of DJI Innovations. No patent liability is assumed with respect 
to the use of the product or information contained herein.

F450 Profile

FlameWheel 450 (F450) is a multi-rotor designed for all pilots for fun or AP. With DJI WKM or NAZA 
autopilot system, it can achieve hovering, cruising, even rolling and other flight elements. It can be 
applied for entertainment, aerial photography, FPV and other aero-modeling activities.

Product Usage Cautions

When flying, the fast rotating propellers of FlameWheel 450 will cause serious damage and 
injury. Therefore, please fly with a high safety consciousness. 

1.  Keep flying multi- rotor away from objects, such as obstacles, human beings, high- voltage lines 

and so on.

2.  Do not get close to or even touch the working motors and propellers, which will cause serious injury.
3.  Do not over load the multi- rotor.
4.  Check that the propellers and the motors are installed correctly and firmly before flight.
5.  Check whether all parts of multi- rotor are in good condition before flight. Do not fly with old or 

broken parts.

6.  Use DJI parts as much as possible.

If you have any problem you cannot solve during installation, please contact our customer service.

Disclaimer

Summary of Contents for FlameWheel 450










Reviews: