dji MINI 3 PRO, User Manual

3

outlet. The Intelligent Flight Battery with the highest power level will be charged first and the rest will 
be charged in sequence according to their power levels. After the battery is fully charged and the 
corresponding LEDs change to solid green, remove the battery from the charging hub as shown in 
Figure A2.

2. Using Intelligent Flight Batteries as Power Banks (Figure B)

  Insert the Intelligent Flight Battery into the charging hub without connecting the hub to a charger, then connect 

any external device to the USB port to charge the device. The Intelligent Flight Battery with the lowest power 
level will be discharged first and the rest in sequence according to their power levels. The status LEDs will 
display the power level of the battery that supplies power when the external device is being charged.

Press the function button to activate charging if charging does not start automatically.

3. Switching Devices to Charge (Figure C)

  When both the intelligent flight battery and an external device are connected for charging, the battery will 

be charged before the external device.

  Press and hold the function button on the charging hub for two seconds to prioritize charging external 

devices. Charge for Intelligent Flight Batteries will be continued after the external device is fully charged 
or it has been charged for 4 hours. When charging an external device, press and hold the function button 
for two seconds to switch back to charging Intelligent Flight Batteries.

  The charging hub may not be able to detect whether the device is fully charged when charging 

an external device with a high standby power consumption such as a smartphone or tablet. 
In this case, charging will not switch to Intelligent Flight Batteries until the external device is 
charged for four hours. Users can manually switch the charging priority by pressing and holding 
the function button for two seconds.  

  When the input of the charging hub is lower than 5V/2A, there is a possibility that the USB port 

will be unable to charge the external devices.

Specifications

Model Number

CHX162-30

Supported Charger

USB Power Delivery charger

Supported DJI Battery

DJI Mini 3 Pro Intelligent Flight Battery 

(

BWX162-2453-7.38) 

DJI Mini 3 Pro Intelligent Flight Battery Plus (BWX162-3850-7.38) 

Input

5V

3A

，

9V

3A

，

12V  3A

Output (USB)

5V

2A

Operating Temperature

5° to 40° C (41° to 104° F)