www.pcessflight.com
4
Tip
：
The GPS/Compass is packaged with a special indication line for mounting for the first time.
Transmitter(TX) & Receiver(RX) Connections
(1) Refer to you TX Manual, setup the Aileron, Elevator, Throttle, Rudder channels on your TX first,
and choose a 3- position switch as control mode switch.
(2) Attach the matched RX to aircraft, then connect your RX to the right ports on MC. The following
diagram shows the connection example for traditional RX.
Step3 Double Check:
In this step, turn on the transmitter, connect the battery to the PMU, and then watch the LED, if you can
see the LED blinks
the system is working.
