©2014 DJI Innovations. All Rights Reserved.
49 |
(1)
(2)
(3)
When the LED flight indicator blinks yellow rapidly during flight, the aircraft has entered into
Failsafe mode, refer to
<Failsafe Function>
for details.
A low battery capacity warning is indicated by the LED flight indicator blinking red slowly or
rapidly during flight. Refer to the
<Low Battery Capacity Warning Function>
for details.
Watch the quick start video about flight for more flight
information:
www.dji.com/phantom2visionplus/training
.
4 Failsafe Function
The aircraft will enter Failsafe modewhen the connection from the remote controller is lost. The flight control
system will automatically control the aircraft toreturn to home and land to reduce injuries or damage.
Home Point:When the aircraft enters into the “Ready to Fly” statusfrom the“Ready to Fly status
(non-GPS)”, the aircraft will record the current GPS coordinates as the home point.
1)
When remote controller signal is lost, PHANTOM 2 VISION will use the recorded the home
point coordinates as the home point for landing.
2)
Home point coordinates will be used to calculate the horizontally distance of the aircraft
(shown as “D” on the GUI of the DJI VISION app).
3)
After successfully record the home point, you can see a fast blink of LED flight indicators on
the aircraft.
4.1 Possible Failsafe Scenario
（
1
）
The remote controller is powered off.
（
2
）
The aircraft has flown out of the effective communication range of the remote controller.
（
3
）
There is an obstacle obstructing the signal between the remote controller and the aircraft, essentially
reducing thedistance the signal can travel.
（
4
）
There is interferencecausing a signal problem with the remote controller.
4.2Failsafe Procedure
Initiating the Failsafe mode from different flying statuses will results in the different landing process. There are two
types flying status that may affect the Failsafe landing process, one is “Ready to Fly” status and the other is “Ready
to Fly (non-GPS)” status. The differences between these two statuses are shown as below:
Ready to Fly(non-GPS) ----Automatic landing
The flight control system will try to keep the aircraft level during descent and landing. Note that the aircraft
may be drifting during descent and landing process.
Ready to Fly ----Automatic go home and land
