Remote Controller
Phantom 4 Pro / Pro+
User Manual
©
2017 DJI All Rights Reserved.
41
Remote Controller Status LED
5IF4UBUVT-&%SFnFDUTUIFTUSFOHUIPGUIFDPOOFDUJPOCFUXFFOUIFSFNPUFDPOUSPMMFSBOEUIFBJSDSBGU5IF
RTH LED indicates the Return-to-Home status of the aircraft. The table below contains more information
about these indicators.
Connecting Your Mobile Device
Tilt the mobile device holder to the desired position. Press the button on the side of the mobile device holder
to release the clamp, and then place your mobile device into the cradle. Adjust the clamp down to secure the
mobile device. To connect your mobile device to the remote controller using a USB cable, plug one end of
the cable into your mobile device and the other end into the USB port on the back of the remote controller.
Optimal Transmission Range
The transmission signal between the aircraft and the remote controller is most reliable within the
area that depicted below:
Optimal Transmission Range
&OTVSFUIBUUIFBJSDSBGUJTnZJOHXJUIJOUIFPQUJNBMUSBOTNJTTJPO[POF5PBDIJFWFUIFCFTUUSBOTNJTTJPO
performance, maintain the appropriate relationship between the operator and the aircraft.
RTH LED
Status LED
The Remote Controller of the Phantom 4 Pro+ includes a display device optimized for the DJI GO 4
app. No other mobile devices are required.
5.8G
90°
60°
2.4G
strong
weak
Summary of Contents for PHANTOM 4 PRO
