37
Vectra® Genisys Ultrasound
TABLE OF CONTENTS
OPERATION
3.
Press the DOSAGE button and raise or lower the unit’s output using the up and down
arrows.
NOTE:
The Dosage and the Treatment Time are directly correlated. Whenever Dosage is
changed, the Treatment Time is automatically changed and reflected on the
window.
4.
Press the START button. A message displays to alert you to the fact that the laser is
armed. The unit will beep two times to count down the number of seconds left until the
applicator is ready, and an orange light will blink two times on the back of the applicator.
Press the Pause/Resume button to begin the treatment.
After you press the Pause/Resume button, the orange light will illuminate on the back of
the applicator to indicate that laser light output is being distributed.
NOTE:
When treatment time has expired, a tone will sound.
The therapy can be interrupted at any time by pressing the Pause/Resume button on the
back of the applicator, the STOP button (on the Operator Interface), or the PAUSE button
(on the Operator Interface).
When the STOP button is pressed, the applicator stops emitting laser light energy, and
the unit returns to the default settings. To resume therapy, press the Start button.
During treatment, the following occurs whenever the PAUSE button on the Operator
Interface or the Pause/Resume button on the back of the applicator are pressed:
STARTING, STOPPING, AND INTERRUPTING THERAPY continued
Vectra® Genisys Laser
