50
OPERATION
SELECTING A USER-DEFINED PROTOCOL (continued)
4.
Use the Down Arrow button to highlight the appropriate protocol.
As you highlight each protocol, a description of the protocol’s parameters displays to the
right.
5.
Press the Display (Enter) button to select the highlighted protocol.
The main window displays with the parameters of the protocol you selected.
6.
Verify the parameters of this program, and use the appropriate buttons on the Operator
Interface to adjust any setting, if necessary. For example, to adjust the time, press the up
and down arrows on the TIME button.
7.
To begin therapy, perform all the procedures outlined in the section entitled “Preparing
the Patient’s Skin for Laser light Therapy” on
page 35
. Then continue with
step 4
of the
section entitled “Starting, Stopping, and Interrupting Therapy” on
page 37
.
Vectra® Genisys Laser
