6
Vectra® Genisys Laser
ABOUT LASER LIGHT THERAPY
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air, oxygen, or nitrous oxide.
The solvents of adhesives and flammable solutions used for cleaning and disinfecting should be allowed to evaporate before the unit is
used.
DO NOT connect the unit to an electrical supply without first verifying that the power supply is the correct voltage. Incorrect voltage may
cause unit damage, malfunction, electrical shock, fire, or personal injury. Your unit was constructed to operate only on the electrical voltage
specified on the Voltage Rating and Serial Number Plate. Contact your Chattanooga Group dealer if the unit is not properly rated.
Laser protective eyewear should be worn by the operator and patient to block infrared light energy from the eyes during treatment.
DO NOT point the laser light beam directly into human or animal eyes. The lens of the eye does not detect the invisible, coherent laser light
beams, potentially resulting in permanent retinal damage.
This unit is considered to be a Class 3B laser light product and thus emits visible and invisible laser light radiation (IR). Avoid direct eye
exposure to the laser light beam. The symbol to the left is located on the back of the applicator and indicates the active radiant surface (the
area on the applicator that emits infrared laser light energy and the direction of the beam of light).
When the unit is on, not all wavelengths are visible to the naked eye. Therefore, when performing any operational or functional check,
always wear Chattanooga Group laser protective eyewear.
•
•
•
•
•
•
•
DANGER
