background image

Nebelmaschine DF-V6C Art.No.: 115297 
 

4 / 13

 

2.

 

Intended use of the device 

This device was developed for professional use on stages, in discos, theatres 

etc.  The device is only approved for a connection up to 230 V 50/60 Hz 

alternating current and only for indoor use.  
Regular breaks during operation increase the lifetime of your device.  
Avoid convulsions or any form of forceful impact during the installation or the 

start up of the device.  
Take care that no cables are lying around. You would endanger your own 

safety and also the safety of a third party.  
It is not allowed to operate or store the device in an environment in which 

spray water or rain is expected.  Humidity or very high atmospheric humidity 

could reduce the isolation of the device and could cause deathly electric 

shocks.   
If using fog machine you have to ensure that the fog saturation of the room 

must allow a good visibility of at least 10m. 
Operate the device not during thunderstorms. Surge voltages could destroy 

the device. Unplug the power supply during thunderstorms.  
Surrounding objects or surfaces should not be in contact with the device.  
Make sure that during the installation and removal of the device the area 

below the place of installation is basically cordoned off. This also applies to 

implementation of service.  
Make familiar yourself with the functions of the device before start-up. People 

without the experience should not handle with the device. The most cause of 

functional disorder is inappropriate handling.  
Keep the device away from children and never operate it unattended.  
Never aim the nozzle on people a keep a distance from 50 cm to the nozzle. 

ATTENTION. The ejected fog is very hot! 
Keep a minimum distance of 50 cm to other objects.  
Use only the recommended, high quality water-based fluid from your dealer. 

Other fluids may cause damages. Do not use flammable additives, such as 

oil, gas, perfumes, etc. in your fluid.   
Never aim the nozzle on open fire or flammable objects.  
Make sure to top off the fluid in time. If the machine operated without fluid it 

can cause damages to the pump or the heating block.  Before top off the 

fluid please unplug the device from the power supply.  
Never drink the fluid. I fit does happen, please contact a doctor. If the fluid 

had contact with the eyes or mucous membranes, rinse immediately with 

water bodies.  
Operate the unit only in a horizontal position. 

Summary of Contents for DJV DF-V6C














Reviews: