Fog machine H-2VSD
4 / 19
Never use solvents or aggressive cleaning agents to clean the device.
Instead, use a soft, slightly damp cloth.
When transporting the device, please use the original packaging or the
accessories provided to prevent transport damage.
Unauthorized changes to the device are prohibited for safety reasons!
1.2.
Any use of the device that deviates from the use described in these
operating instructions can lead to damage to the device. In this case,
the warranty claim expires. In addition, it should be noted that any
other use is associated with dangers and can lead to short circuits, fire,
electric shock and falls, for example.
Over head mounting
Risk of death!
During installation, the provisions of BGV C1 (formerly VBG 70)
and EN 60598-2-17 must be observed! The installation is to be
carried out exclusively by authorized specialist personnel.
The suspension devices of the device must be constructed and dimensioned
in such a way that they can carry ten times the payload for one hour without
causing permanent damaging deformation.
The installation must always be carried out with the help of a second,
independent suspension. This can, for example, be a suitable safety net. The
secondary suspension must be designed and installed in such a way that in
the event of a failure of the main suspension, no part of the installation can
fall.
During assembly, conversion and dismantling, staying unnecessarily in the
area of movement areas, on lighting bridges, under high workplaces or in
other hazardous areas is prohibited.
The commercial user has the following responsibilities for safety-related and
mechanical equipment:
•
Check by an expert before the first start-up or after decisive changes
before the start-up again.
•
Review in the scope of the acceptance test at least every four years by
an expert.
•
Inspection by an expert at least once a year
How to proceed with overhead attachment:
Ideally, the device should be installed outside of the area where people are.
