Setting the alarm
Ø
Press the MODE key once.
0:00
is shown as the
alarm time for just 10 seconds.
Ø
If you press the SET key during that time, the
hours of the alarm time flash and you can set them
to the required time by pressing the UP key. The
time format corresponds to the format you have
chosen when setting the time.
Ø
If you press the MODE key, the alarm time minutes
will flash. Press the UP key until the required alarm
time minutes are shown.
Ø
Then press the SET key in order to save the alarm
time. In order to activate the alarm, press the UP
key. The alarm symbol
appears in the display.
At the selected time, you will hear a beep.
Ø
Press the MODE key in order to stop the alarm. The
alarm will function at the same time the next day.
Ø
In order to show the alarm time during normal
time display, press the MODE key. Press the key
again in order to return to the time / date display.
Ø
In order to deactivate the alarm function, press
the MODE key and then the UP key. The alarm
symbol
disappears from the display.
“Countdown” function
The device can count down a certain period of time
and then emit an acoustic signal.
4
Summary of Contents for PU-700
Page 1: ...3 ...
