Part I: General Safety Rules
3
WARNING
Read
this
Safety
&
Operating
Instructions
manual
before
you
use
the
Wood
Chipper.
Become
familiar
with
the
operation
and
service
recommendations
to
ensure
the
best
performance
of
your
machine.
Propose
CAUTION
This machine is designed solely to chip wood and must not be used for any other purpose.
It should only be used by trained operators who are familiar with the content of this manual.
It is potentially hazardous to fit or use any parts other than your dealer parts. The company
disclaims all liability for the consequences of such use, which in addition voids the machine
warranty.
Before
using
the
wood
chipper
NOTICE
A
.
Operators must be fully trained before using this machine.
B
.
User Manual is read and understood.
C
.
Machine is positioned on level ground; all guards are fitted and in good condition.
D
.
Blades are in good condition and secure. All blades are sharpened or replaced in sets.
E
.
All fasteners are checked for tightness.
F
.
Only WOODEN materials free of nails etc. are fed into the machine.
G
.
Emergency stop wire is rightly connected and the switch is functional.
H
.
Fire extinguisher is available on site.
When
using
the
wood
chipper
NOTICE
A.
Always
feed
from
the
side.
NEVER
STAND
DIRECTLY
IN
FRONT
OF
THE
FEED
CHUTE
B.
It
is
better
to
have
a
second
trained
operator
within
easy
reach
of
the
machine.
C.
Maintain
strict
discipline
at
all
times
and
service
machine
at
specified
periods.
D.
Note
direction
of
discharge
chute
and
if
necessary,
note
the
wind
direction
to
prevent
debris
from
being
blown
into
unsafe
areas
or
where
it
could
affect
members
of
the
public.
E.
DO
NOT
put
any
part
of
your
body
into
the
in
‐
feed
chute
while
the
machine
is
running.
F.
DO
NOT
operate
the
machine
while
under
the
influence
of
alcohol
or
drugs.