- 3 -
Multifunction
JP25
Date Setting
1. Pull crown out to position 2.
2. Turn crown clockwise to set the date.
NOTE: If the date is set between the hours of 9:00 PM and 1:00 AM, the date may not change on the following day.
3. After the date has been set, push crown back to position 1.
Day and Time Setting
1. Pull crown out to position 3.
2. Turn crown clockwise to set hour and minute hands.
3. The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have reached the desired day.
4. Return crown to position 1.
Dual Time Setting
1. Press A to set the dual time hand forward in units of 15 minutes.
2. Press B to set the dual time hand back in units of 15 minutes. The dual time hand can advance continuously by pressing and holding A or B.
A
B
1 2 3
DAY
24-HOUR DUAL TIME
24-HOUR
DATE
Multifunction
VX3J / 6P29 / 6P79
Date Setting
1. Pull crown out to position 2.
2. Turn clockwise to advance the date hand.
3. Push crown back to position 1.
Day and Time Setting
1. Pull crown out to position 3.
2. Turn clockwise to advance hour and minute hands.
NOTE: The hand showing days of the week will also move with the hour and minute hands. Keep turning until you have reached the desired day.
24-Hour Sub-Dial Setting
The 24-hour hand moves correspondingly with the hour and minute hands. When setting the time be sure to check that the 24-hour hand is
set properly.
Multifunction
ISA 9238 / 1970
Time Setting
1. Pull crown out to position 2.
2. Turn clockwise to set the hour, minute and 24-hour hands.
3. Push crown back to position 1.
Date Setting
1. Pull crown out to position 2.
2. Turn clockwise until desired date is set.
3. Push crown back to position 1.
Day Setting
1. Pull crown out to position 2.
2. Turn clockwise to advance the day hand until the desired day is set. The day hand will advance one day when 4:30 AM is reached.
3. Push crown back to position 1.
24-Hour Sub-Dial Setting
1. Set crown to position 1.
2. Press B to advance the hour hand until desired time is set.
1 2 3
24-HOUR
DAY
DATE
A
B
1 2
DAY
24-HOUR DUAL TIME
DATE
ISA chronograph
8172/220 (8162/220, no date)
(1 crown/2 pushers)
Time/Day Setting
1. Pull crown out to position 3.
2. Rotate crown to set time.
3. To adjust day, continue rotating crown 24 hours until day is correct.
4. Return crown to position 1.
Date Setting
1. Pull crown out to position 2.
2. Rotate crown clockwise until the correct date is shown in the date window.
3. Return crown to position 1.
chronograph Operation
1. Press A to start/stop the chronograph.
2. Press B to reset.
NoTe: After 2 hours of continuous running, the chronograph will automatically stop and reset to save the battery.
Split Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset.
DAY
SECOND HAND
CHRONO MINUTE HAND
CHRONO 1/5
SECOND HAND
DATE
