- 6 -
Digital
QMLG-020/QMLG-027
Normal Time Display
1. Press A to change mode. Mode sequence is normal time, alarm, time zone 2, timer, and chronograph.
2. Press B for EL.
NoTe: At any point in any setting mode, press D to exit setting mode.
NoTe: In any setting mode, if no pusher is operated for 2 minutes, all changes will be saved
and the setting will automatically return to display mode.
Time and calendar Setting
1. In normal time display, press D; seconds will begin flashing.
2. Press C to set seconds to zero.
3. Press A to advance to hour.
4. Press C to advance digit, press and hold C for fast advance.
5. Press A to set and advance to next setting value.
6. Setting sequence is: seconds, hour, minute, year, month, and date.
7. Press D to exit setting mode.
NoTe: Weekday is automatically updated upon exiting setting mode.
NoTe: At any point in time/calendar setting mode, press B to toggle 12/24 hour format.
Alarm Mode
1. Press A to change to alarm mode.
2. Press B to toggle alarm/chime on/off.
Alarm Setting
1. Press A to change to alarm mode.
2. Press D to enter setting mode; hour will begin flashing.
3. Press C to advance digit; press and hold C for fast advance.
4. Press A to set and advance to next setting value.
5. Setting sequence is: hour, minutes, month, date. For daily alarm, leave month and date set at “----”.
6. Press D to exit setting mode.
Time Zone 2
1. Press A to change to time zone 2.
NoTe: In time zone 2 display, normal time is shown in the lower portion of the display.
2. Press D to enter setting mode; hour will begin flashing.
3. Press C to advance digit, press and hold C for fast advance.
4. Press A to set and advance to minutes.
5. Press C to advance digit, press and hold C for fast advance.
6. Press D to exit setting mode.
NoTe: At any point in time zone 2 setting mode, press B to toggle 12/24 hour format.
C
D
B
A
countdown Timer
1. Press A to change to timer mode.
2. Press C to start/stop the timer.
3. Press B to clear the countdown and reset the timer.
Timer Setting
1. Press D to enter setting mode; hour will begin flashing.
2. Press C to advance digit; press and hold C for fast advance.
3. Press A to set and advance to next setting value.
4. Setting sequence is: hour, minutes, seconds.
5. Press D to exit setting mode.
NoTe: At any point in setting mode, press B to toggle auto reset on/off. When auto reset is
on, timer will automatically re-start upon reaching zero.
chronograph Mode
1. Press A to change to chronograph mode.
2. Press C to start/stop the chronograph.
3. Press B to reset to zero.
Split Time
1. Press B while the chronograph is running for split time.
2. Press B again to return to chronograph.
3. Press C to finalize timing.
4. Press B to reset to zero.
Digital Module
QMLG-021
Normal Time Display
1. Press A to display month, date and weekday.
2. Press and hold A, then press B to change date format.
3. Press B to display alarm time.
4. Press and hold B, then press A to toggle alarm/chime on/off.
5. Press and hold B, then press C to toggle 12/24-hour format.
6. Press C to change mode.
7. Press D for EL. Light will show for 3 seconds.
Time/calendar Setting
1. From normal time display, press and hold C for three seconds, then press C again to enter
time/calendar setting mode. Tuesday flag and second digits will begin flashing.
2. Press B to reset seconds to zero.
3. Press A. Minutes will begin flashing.
4. Press B to advance digit.
5. Press A to set and advance to next setting value.
6. Setting sequence is minutes, hour, month, date, weekday.
7. Press C to exit setting mode and return to normal time display.
NoTe: C must be pressed to exit the setting sequence loop.
Alarm Setting
1. From normal time display, press and hold C for three seconds to enter alarm setting mode.
Monday flag and hour will begin flashing.
A
B
D
C
2. Press B to advance hour.
3. Press A to set and advance to minute digits.
4. Press B to advance minutes.
5. Press C to exit setting mode and return to normal time display.
6. To test alarm, press and hold B, then with B still pushed, press and hold A. Alarm will sound.
7. Press B to silence alarm.
chronograph Mode
1. From normal time display, press C to enter chronograph mode.
2. Press A to start/stop the chronograph.
3. Press B to reset the chronograph to zero when the chronograph is not running.
Split Time
1. Press B while the chronograph is running.
2. Press B again to return to the chronograph.
3. Press A to finalize timing.
4. Press B to reset to zero.
Digital
DA226-1 (ZDD58)
Normal Time Display
Press B to flash calendar display.
Time And calendar Setting
1. Press A to enter setting mode; seconds will begin flashing.
2. Press B to set seconds to 0 (zero); setting will automatically return to normal time display when seconds are set to zero.
3. Press A twice; hour will begin flashing.
4. Press B to advance hour; press and hold B for fast advance.
5. Press A to set and advance to next setting value.
6. Setting sequence is seconds, hour, minutes, month, date.
7. Press A to exit setting mode.
