Basic safety guidelines
10
User’s Manual
DLoG ITC 7
Avoid system overloads
To avoid system overloads, check the sum load of all components installed.
Make sure that the input current for each consumer falls within the appropriate
boundaries (see: the technical data for each corresponding consumer).
2.6.
CE Marking
Warning! This is a class A device. This equipment may cause interference in a residential
installation. In this case the user is encouraged to perform appropriate measures to
correct the interference.
Figure 2.1: CE Marking
Use care in airplanes or in clinical/medical areas
Some devices in hospitals and airplanes are not protected from radio frequency
energy. Consequently, do not use the DLoG ITC 7 in airplanes or hospitals without
prior authorization. Here use of the DLoG ITC 7 is only permitted if authorization is
obtained.
Caution with pacemakers
Do not use the DLoG ITC 7 near pacemakers. The DLoG ITC 7 can affect the function
of medically implanted devices such as pacemakers and create interference. Do not
place the DLoG ITC 7 near such devices.
Keep a minimum distance of 20 cm between such a device and the DLoG ITC 7 in
order to reduce the risk of interference.
If you have reason to assume that interference has occurred, then turn the DLoG ITC
7 off and consult a heart expert.
