BT-ST-751
TORQUE WRENCH
Dl
�DANIELS
...
..,
MANUFACTURING
CORPORA 110N
DATASHEET
I
SEE PAGE 4 FOR IMPORTANT INFORMATION CONCERNING LIMITED WARRANTY, AND LIMITATION OF LIABILITY.
I
OPERATING INSTRUCTIONS
PLEASE READ BEFORE USE!
• Precision Dial Torque Wrench
• Electric Signal Light
• 0-200 in. lb. torque range
0
Increment markings of 5 in. lb.
• 3/8" drive
The BT-ST-751 Torque Wrench has the precision accuracy of a
standard dial torque wrench, with the added feature of an electric
signal light for torque limiting. The accuracy of this wrench is
±4% between 40in-lbs and 200in-lbs. Accuracy is not controlled
below 40in-lbs.
The light signals the user when the preset torque value has been
reached, eliminating the necessity of watching the dial during the
torque operation.
The Torque Wrench can also be used as a hand held static torque
meter. Instead of turning the Torque Wrench to tighten one part onto
another, the Torque Wrench is held stationary as a meter and another
tool is used to tighten the parts.
OPERATION AND SETTING OF ELECTRIC SIGNAL DIAL
Method 1: Setting Electric Arm at desired torque value.
Certification:
This Torque Tool, as calibrated at the factory, is certified to meet or exceed
accuracy specified in the Federal Specification GGG-W-00686C and was calibrated
on a torque standard that is traceable to the National Bureau of Standards.
DANIELS MANUFACTURING CORP., 526 THORPE ROAD, ORLANDO, FL 32824, USA, PHONE 407/855-6161, FAX 407/855-6884
COPYRIGHT ©2014 DANIELS MANUFACTURING CORP., USA. WWW.DMCTOOLS.COM E-MAIL: DMCOOMCTOOLS.COM ALL RIGHTS RESERVED
REV. D
11/14
PAGE 1
BT-ST-751-DS
