DMEGC AC Module Installation Manual
- 25 -
6.3 Inspection of Connector and Cable
Perform the following preventive maintenance every 6 months:
Check the sealing gels of the junction box for any damage.
Examine the PV module(s) for signs of deterioration. Check all wiring for possible rodent damage,
weathering and that all connections are tight and corrosion free. Check electrical leakage to ground.
If any problem arises, consult a professional solar service provider for suggestions. Caution: observe solar
manufacturers' maintenance instructions for all components used in the system, such as support frames,
charging regulators, inverters, batteries etc.
7. Disclaimer of Liability
Because the use of this manual and the conditions or methods of installation, operation, use and maintenance of
photovoltaic (PV) product are beyond DMEGC’s control, DMEGC does not accept responsibility and expressly
disclaims liability for loss, damage, or expense arising out of or in any way connected with such installation,
operation, use or maintenance.
No responsibility is assumed by DMEGC for any infringement of patents or other rights of third parties, which
may result from use of the PV product. No license is granted by implication or otherwise under any patent or patent
rights.
The information in this manual is based on DMEGC’s knowledge and experience and is believed to be reliable;
but such information including product specification (without limitations) and suggestions do not constitute a
warranty, expresses or implied. DMEGC reserves the right to change the manual, the PV produce, the specifications,
or product information sheets without prior notice.
