DMEGC AC Module Installation Manual
- 1 -
1. Important Safety Information
1.1 Read this First
Thanks for choosing DMEGC AC modules. Please read this manual completely before you install. With
proper operation and maintenance, DMEGC module will provide you with clean, renewable solar electricity for
many years. This manual contains important installation, maintenance and safety information of DMEGC
photovoltaic module (hereafter is referred to as “module”)
This document provides safety and installation information for DMEGC AC Module; The module consists
of a PV Module and a Smart Grid-Ready Microinverter. The module converts incident solar energy into AC
power and seamlessly integrates into Enphase Enlighten energy monitoring and analysis system. Read this
document before installing, wiring, or using this product. Failure to comply with these instructions will
invalidate the DMEGC Warranty and may cause loss, damage, injury, or death. Module limited warranty is
described in The DMEGC Warranty document.
If there are any questions, please contact our sales department for further explanation. The installer should
conform to all the safety precautions in the guide when installing the module. Local codes should also be
followed in such installation.
DMEGC DC module warranty:
Microinverter & its accessories warranty:
https://enphase.com/en-uk/warranty
IMPORTANT:
The Enphase Envoy-S and IQ Microinverter for DMEGC AC Modules do not communicate
with, and should not be used with, previous generation Enphase cables and Envoys.
1.2 Product Labels
The following symbols appear on the product label and are described here. Before installing AC modules,
read all safety instructions in this document-
WARNING:
Hot surface.
DANGER:
Refer to safety instructions.
DANGER:
Risk of electrical shock.
Refer to manual
Double-insulated
