Digital Monitoring Products, Inc. | 7400 Series Thinline™ Keypad Installation and Programming Guide
5
User Options Menu
To access the Options menu, press and hold the back arrow and
CMD
keys for 2 seconds.
Backlighting Brightness
Adjust the LCD display brightness level, power and armed LEDs, the green keyboard, and the
logo backlighting. At
SET BRIGHTNESS
, use the left select key to decrease the brightness and
the right select key to increase the brightness. If the brightness level is lowered, it reverts to
maximum intensity whenever a key is pressed. If no keys are pressed, and the speaker has not
sounded for 30 seconds, the user-selected brightness level restores.
Internal Speaker Tone
Adjust the keypad internal speaker tone. At
SET TONE
, use the left select key to decrease the
tone and the right select key to increase the tone.
Internal Volume Level
Adjust the keypad internal speaker volume for key presses and entry delay tone conditions.
During alarm and trouble conditions, the volume is always at maximum level. At
SET
VOLUME
LEVEL
, use the left select key to decrease the volume and the right select key to increase the
volume.
Model Number
Display the keypad model number, firmware version, and date.
Keypad Address
Display the current keypad address.
Connect Status
Display the status of the connection with the panel.
Summary of Contents for Thinline 7463
Page 2: ......
Page 39: ......
Page 40: ...LT 2006 1 01 20113 2020 Digital Monitoring Products Inc...
