Thinline Icon Series User’s Guide
Alert Operation
Steady Tone
A trouble condition on the system. A zone
number may be displayed. Pressing any key
silences the steady alert tone.
1 One-Second Beep
Indicates the successful completion of a function.
4 Short Beeps
When an incorrect key or function is entered.
1 Short Beep
Each time a key is pressed.
Panic Key Operation
Your keypad may be programmed to send a Panic, Emergency, or Fire
report to your monitoring station. If this option is programmed for your
keypad, icons appear below the top row Select keys. Press and hold the
two Select keys adjacent to the desired icon for 2 seconds and a beep
from the keypad is heard. The report is sent to your monitoring station.
Top Row Select Keys
Police
Emergency
Fire
Extending the Schedule
Your system may be programmed with a schedule to
identify authorized disarmed periods. This option displays
and a steady tone sounds when the authorized disarmed
period is about to expire. Press the Select key under
EXTEND and enter your user code to extend the schedule
for an additional hour. If more than one hour is needed,
after entering a user code, press the number of hours
between one (1) and the maximum nine (9).
System Functions
Door Chime
You can enable monitor for all Perimeter zones in the system to sound a
doorbell chime at the keypad anytime a zone is opened. Press and hold
the CHIME (5) key for two seconds. The Door icon will display and the
doorbell chime sounds. Pressing the CHIME key again for two seconds
turns off this function.
Easy Exit
This function allows you to exit your home while the system is armed.
Press and hold the EXIT (8) key until the exit countdown begins to
display and then exit. The system automatically arms again after the
countdown completes.
Outputs On/Off
+[your code]+[output number]
Your system may have lights or other devices connected to outputs that
you can turn on or off using the keypad. Press and hold the OUTPUT
(0) key until the keypad beeps. Enter your user code and then the two-
digit number of the output including any leading zero such as 01. This
changes the output from off to on or vise versa.
Arming the System
Arming with a Code or Proximity Credential
While the Thumbs Up icon is displaying, enter your user code or
present a proximity credential to begin the exit countdown. Arming is
delayed until the end of the countdown. Pressing the INST key during
the exit countdown immediately arms the system and removes all
entry/exit delays. An alarm would immediately occur should an exit
door be opened.
Arming with Shortcut Keys
While the Thumbs Up icon is displaying, press and hold the ALL, HOME,
PERIM or SLEEP key for two seconds to arm your system.
ALL arms the entire system.
HOME or PERIM arms the Perimeter zones leaving the
Interior disarmed.
SLEEP arms the Perimeter and Interior zones leaving the
sleeping area disarmed. (optional)
Arming with Faulted Zones (Thumbs Down)
Thumbs down displays and the keypad sounds four short
beeps when a burglary zone is faulted while arming the
system. The zone number is shown in the 3-character
display. If the problem is simply an open door or window,
press the Back Arrow key, correct the problem, and
try arming again. If the problem cannot be corrected,
press the Select Key under BYPASS to go ahead and arm
the system. A zone remains bypassed until the system
is disarmed. If no selection is made, the system will
automatically force arm any faulted burglary zones without
bypassing.
Disarming the System
Disarming with a Code or Proximity Credential
When the Armed (Lock) icon is displaying, enter your user code or
present a proximity credential to disarm the entire system.
Disarming During an Alarm
Enter your user code or present a proximity credential to silence the
siren leaving the system armed.
After a user code is entered to silence the siren, CANCEL/VERIFY
displays allowing you time to investigate a burglary alarm prior to
disarming the system.
If a valid alarm has
not
occurred, choosing CANCEL
disarms the system and sends a Cancel or Abort message
to the Central Station.
If the alarm is valid, choosing VERIFY sends a Verify
message to the Central Station. The system remains
armed to provide continued intrusion detection.
The Icons
AC Power
On Steady - AC power is good.
Pulsing - AC power is off.
Battery
On Steady - Battery power is good.
Pulsing - Battery power is low.
Armed Status
Open Lock - The system is completely disarmed.
Closed Lock - Some or all areas are armed. See System
Displays A, H, P or S.
Closed Lock/Instant - Some or all areas armed Instant. See
Arming the System.
Door Chime
Door or window perimeter zone(s) are selected for monitor.
See Door Chime.
Thumbs Up
All burglary protection zones are normal and system is
ready to arm.
Thumbs Down
System is not ready to arm due to a burglary zone in a
faulted state such as an open door. See Zone Status.
Telephone Handset
Pulsing - A system message being sent to your monitoring
station failed to transmit over the telephone line.
Network Connection
On Steady - Your system is programmed for Network
(Internet) communication and is functioning properly.
Pulsing - Network (Internet) communication is interrupted.
Burglar
A burglary alarm has occurred. The zone number is shown in
the 3-character display.
Flame
A fire alarm has occurred. The zone number is shown in
the 3-character display.
