Digital Monitoring Products
XR150/XR550 Series Canadian Installation Guide
2
INTRODUCTION
1.7
Enclosure Specifications
The panels are shipped in an enclosure with a transformer, End-of-Line resistors, battery leads, user’s guide, and
programming sheets.
Enclosure
Model
Size
Color(s)
Construction (Cold Rolled
Steel)
350
17.5”W x 13.5”H x 3.5”D
Gray (G) or Red (R)
18-Gauge
350A
17.5”W x 13.5”H x 3.75”D
Gray (G)
18-Gauge with 16-Gauge door
341
13.22”W x 7.0”H x 3.5”D
Gray (G)
20-Gauge
349
12.5”W x 11.5”H x 3.5”D
Gray (G)
20-Gauge
352X
14.5”W x 32.0”H x 4.0”D
Gray (G)
16-Gauge
Panel Features
2.1 Description
The DMP XR150/XR550 Series Canadian panel is a versatile 12VDC, combined access control, burglary, and fire
communicator panel with battery backup. The panels provide eight on-board burglary zones and two on-board 12VDC
Class B powered zones. The powered zones have a reset capability to provide for 2-wire smoke detectors, relays, or
other latching devices. You can use up to sixteen supervised 32-character LCD keypads; network communications and
expansion interface cards; zone and output expansion modules; and initiating and indicating circuit modules. You can
also connect auxiliary devices to the panel’s output relays to expand the basic system control capability. Combined
current requirements of additional modules may require an auxiliary power supply. Refer to the XR150/XR550
Series Power Requirements section in this guide when calculating power requirements. The XR150/XR550 Series can
communicate to DMP SCS-1R Receivers using digital dialer, cellular, network, or Contact ID communication.
2.2
Zone Expansion
Each panel provides multiple options for zone expansion.
• 10 on-board zones
• Up to 64 programmable keypad zones
• Up to 500 LX-Bus zones
Using DMP LCD keypad remote zone capability and zone expansion modules, additional zones are available on each
panel:
• XR550 provides up to 574 additional zones
• XR150 provides up to 142 additional zones
The panel keypad data bus supports up to 16 supervised device addresses with each address supporting up to four
programmable expansion zones (64 total).
Using the on board LX-Bus™ (LX500-LX900) connections, and any combination of single, four, eight, or sixteen-zone
expansion modules and single-zone LX-Bus™ detectors, additional zones are available on each panel:
• XR550 provides up to 500 additional zones (LX500-LX900)
• XR150 provides up to 100 additional zones (LX500)
Note:
Do not use shielded or twisted pair wiring for LX-Bus or Keypad Bus circuits.
2.3
Output Expansion
In addition to the two SPDT relays and four programmable open collector outputs on the XR150/XR550 Series, you
can also connect up to 25 programmable Model 716 Output Expansion Modules to each LX-Bus. These modules can
provide an additional 500, 300, or 100 programmable SPDT relays.
The panels provide Output Schedules for programming the 716 to perform a variety of annunciation and control
functions. Also assign the 716 outputs to any panel Output Options such as Fire Alarm, Communication Fail, or Phone
Trouble Outputs. Refer to the 716 Installation Guide (LT-0183).
The LX-Bus™ also supports the Model 717 Graphic Annunciator Module. Each 717 module supplies 20 switched ground
outputs that follow the state of their assigned zones.
Note
: The 717 supports the first eight Keypad Bus addresses. To follow Keypad Bus addresses nine through 16, install
multiple 716 modules. Refer to the 717 Installation Guide (LT-0235) and 716 Installation Guide (LT-0183).
2.4
Central Station Communication
You can program the panel for reporting to DMP SCS-1R Receivers using digital dialer, cellular, network, or Contact ID
communication. The panel connects at the premises to a standard RJ31X or RJ38X telephone jack. Use the DMP 893A
Dual Phone Line Module when connecting the XR150/XR550 Series panel to two separate phone lines.
