Battery installation and disassembly
Installation and disassembly of antenna
¾
¾
Insert the battery according to the diagram.
According to the direction of the battery
icon into, until I heard a clatter.
¾
¾
The battery button is pushed out in the direction
of the arrow.
Then push the battery in the direction of the arrow.
¾
¾
Clockwise will tighten to the size of antenna antenna.
Turn the antenna out counterclockwise.
-10-
'(9,&($66(0%/<
¾
NUMBER
1
Host
1
2
Battery
1
3
Antenna
1
4
Charger
1
5
Belt clamp
1
6
Instructions
1
The elastic clips of the belt
clip are lifted outwards and
pushed upwards, so that the
belt clip can be dismounted.
¾
The belt clip card in accordance with the slot
position and push down until you hear a "click"
sound installation is complete.
Equipment fittings
Clean
The key, control knob and cabinet of this product are
very dirty. Clean with neutral detergent and non-woven
fabric. Don't use chemical agents such as detergent,
alcohol, spray or petroleum preparation to avoid damage
to the surface and shell. After cleaning, make sure that
the product is completely dry, otherwise don't use it.
z
z
Installation and disassembly of belt clip
SERIAL NUMBER
PROJECT
Please regularly use clean dry lint free or brush to wipe
the dust on the surface of the product and the charging
pole.
-11-
