Manufacturer: “DMTech” Ltd., 58 Kliment Ohridski Str., Pleven 5800, Bulgaria, EU
,
http://dmtech-ltd.com
Fig.2
Fig.3
Fig.4
Place the detector on the base and rotate it .
–
If the detector is locked to the base, to unlock it , insert first the key to the specified location
(Fig. 4) and rotate the detector counterclockwise;
–
Test the detector to check the correct operation of the LED
indication;
–
During normal operation, the LEDs blink every 16 seconds.
3.
TESTING AND SERVICE SCHEDULE
T
esting
–
Apply power
;
–
Wait about a minute or until the detector begins to blink
;
–
Operate the detector test spray and / or temperature sourse. The two red LEDs must illuminate
permanently.
Service schedule
–
Visual inspection for mechanical damage and pollution
- once a year;
–
Verification of performance
- once a year;
–
Prophylactic cleaning
-
depending on the environment in which it is located.
Optical detectors D9000 SR/MSR are software tested and when the detector is contaminated, it is signaled
by flashing LEDs for 2 seconds to 2 seconds.
D9000 Series detectors are compatible with all conventional power panels, that have met the requirements
of a standards EN54.
The detectors are available with three types of bases:
–
B 9000
-
Standard base
;
–
B 9000D
-
Standard base with mounted diode for fault detection - removed detector;
–
B 9000R
- S
tandard base with relay output 12V for security panels
.
4.
Warranty obligations
The warranty period is 36 months from the date of sale, provided that:
– the conditions of storage and transport have been followed;
– release is performed by authorized persons;
– the requirements for operation stated in this instruction have been abode;
– defects are not caused by natural phenomena and accidents of the plug socket.
