1. The main interface of this system shows the clock. Touch "
,
" keys to increase or decrease the
master volume. Touch "
" key to enter the first level subpage:<input>,<tone>,. Then you can touch "
" key again to enter the second level subpage or touch "
,
" keys for the switch of different
entrance option. Also, you can touch "
" key to enter the third level subpage to choose the function
you need.
2. If you want to return to the previous subpage use the "
" key. If no operation is done, the system
will return to the main interface in 5 seconds.
Installing Battery in the Remote Control
Problem
Possible Reasons/solutions
The system has no power.
No sound at all.
Either of the main channels has
no sound.
LCD screen displays abnormally.
The plug is not inserted properly.
The socket has no power.
POWER button has not been pressed.
"
"
Incorrect selection of input signal.
If mute state is turned on.
Sound source machine is not powered.
The signal plug is connected incorrectly or
lines are short-circuited.
It may be effected by exterior strong disturbance,
turn off first and then turn on again.
Avoid direct sunlight/heat.
Notes about the Remote Control
Trouble Shooting
13
Summary of Contents for DTi300
Page 1: ...DTi300 ...
Page 4: ...Systeminkoppling Stereoingång ...
Page 11: ...System Connection 10 ...
