DMX ProFusion DS, User Manual

3

Follow the steps below to connect your ProFusion DS to your amplification equipment:

STeP 1

  Connect one end of the RCA audio cable with into the white RCA jack labeled 

ZONE 1

 on the rear panel 

of your ProFusion DS.  Connect the other end of the RCA cable into the corresponding input of your 

amplification equipment.  
Note:   If your ProFusion DS is configured for only one zone, the audio for that zone will output from 

both the Zone 1 and Zone 2 RCA jacks.  Connect one end of the RCA audio cable into the red RCA 

jack labeled “ZONE 2” on the rear panel of your ProFusion DS.  Connect the other end of the RCA 

cable into the corresponding input of your amplification equipment. 

STeP 2

   (Optional) If your service includes the Messaging On Hold (MOH) feature, connect one end of the RCA 

audio cable into the red RCA jack labeled 

ZONE 2

 on the rear panel of your ProFusion DS.  Connect the 

other end of the RCA cable into the corresponding input of your MOH amplification equipment.

STeP 3

    Connect the supplied power cord to the power cord input on the rear of your ProFusion DS and plug 

the other end to a properly grounded electrical outlet.