DMX ProFusion M5, User Manual

15

Advanced Operation

This section is a guide to some of the more advanced features of ProFusion M5.

Video settings

determining the Current Video Output Type

 To determine the current video output type from the Title/Artist screen:

sTeP 1  Press the ENTER button to access the Control Panel menu system.
sTeP 2  Press the DOWN button until 

Video Settings

 is highlighted, then press the ENTER button.

sTeP 3  Press the DOWN button to scroll through the available video output types.  The current video output 

type will have 

Active

 after it.

Note:  If the S-Video or Composite video output type is active, the TV option will have either (SV-

NTSC Active) if set to S-Video, or (C-NTSC Active) if set to Composite.

Changing the  Video Output Type

Changing the video output type from the Title/Artist screen:

sTeP 1  Press the ENTER button to access the Control Panel menu system.
sTeP 2  Press the DOWN button until 

Video Settings

 is highlighted, then press the ENTER button.

sTeP 3  Press the DOWN button until 

Set Video Port

 is highlighted, then press the ENTER button.

Note:  If the desired option is S-Video or Composite, select the TV option, then select S-Video or 

Composite. 

sTeP 4  Press the DOWN button until the desired video output type is highlighted, then press the ENTER but-

ton.  Rebooting the device may be required.  If a reboot is required, the control panel will display 

Press 

Enter to Reboot

.

setting the Video Output resolution

The ProFusion M5 will be configured for a specific resolution prior to installation.  This resolution will be the 

DMX Default and can be selected from the Set Resolution option.

Changing the resolution from the Title/Artist screen:

sTeP 1  Press the ENTER button to access the Control Panel menu system.
sTeP 2  Press the DOWN button until 

Video Settings

 is highlighted, then press the ENTER button.

sTeP 3  Press the DOWN button until 

Set Resolution

 is highlighted, then press the ENTER button.

sTeP 4  Press the DOWN button until the desired resolution is highlighted, then press the ENTER button.

Note:  If the desired resolution is not listed, the Custom option can be used to create a specific reso-

lution.  The steps for creating a Custom resolution are listed on the next page.