DMX ProFusion M5, User Manual

P r o f u s i o n   m 5   u s e r   G u i d e

18

Modifying the iP Address and subnet Mask

Modifying the IP address and subnet mask from the Title/Artist screen:

sTeP 1  Press the ENTER button to access the Control Panel menu system.
sTeP 2  Press the DOWN button until 

Network Control

 is highlighted, then press the ENTER button.

sTeP 3  Press the DOWN button until 

Set Configuration

 is highlighted, then press the ENTER button.

sTeP 4  Press the DOWN button until 

Set IP/Subnet Mask

 is highlighted, then press the ENTER button.

Note:  IP addresses such as 10.1.1.100 should be entered as 010.001.001.100.

sTeP 5  Press the UP or DOWN buttons to set the value for the first digit of the first octet, then press the RIGHT 

button to move to the second digit of the first octet.

sTeP 6  Press the UP or DOWN buttons to set the value for the second digit of the first octet, then press the 

RIGHT button to move to the third digit of the first octet.

sTeP 7  Press the UP or DOWN buttons to set the value for the third digit of the first octet, then press the 

RIGHT button to move to the first digit of the second octet.

sTeP 8  Repeat steps 5 – 7 for the remaining octets, then press the ENTER button to accept the change.
sTeP 9  Repeat steps 5 – 8 to set the subnet mask.

Modifying the default Gateway

Modifying the default gateway from the Title/Artist screen:

sTeP 1  Press the ENTER button to access the Control Panel menu system.
sTeP 2  Press the DOWN button until 

Network Control

 is highlighted, then press the ENTER button.

sTeP 3  Press the DOWN button until 

Set Configuration

 is highlighted, then press the ENTER button.

sTeP 4  Press the DOWN button until 

Set Default Gateway

 is highlighted, then press the ENTER button.

sTeP 5  Press the UP or DOWN buttons to set the value for the first digit of the first octet, then press the RIGHT 

button to move the second digit of the first octet.

sTeP 6   Press the UP or DOWN buttons to set the value for the second digit of the first octet, then press the 

RIGHT button to move to the third digit of the first octet.

sTeP 7   Press the UP or DOWN buttons to set the value for the third digit of the first octet, then press the 

RIGHT button to move the first digit of the second octet.

sTeP 8  Repeat steps 5 – 7 for the remaining octets, then press the ENTER button to accept the change.

Modifying the FTP server iP address

The Set FTP Server option allows you to set or change the address of your designated FTP server. 

Modifying the FTP server from the Title/Artist screen:

sTeP 1   Press the ENTER button to access the Control Panel menu system.
sTeP 2  Press the DOWN button until 

Network Control

 is highlighted, then press the ENTER button.