2
Thank you for choosing a SOUNDLIGHT product.
The SOUNDLIGHT DMX Demultiplexer 3006A is an intelligent DMX demultiplexer, able to decode
digital data complying with USITT standard DMX-512, or DIN 56930-2 respectively, to analog output
voltages of 0-10V DC. The board can be used with all standard light control systems. Its special
advantages include:
-
universal protocol decoding
Recognizes all variants of the protocol as defined by USITT/ESTA/WETF/DIN
-
future-proof
The unit is software controlled an can be adapted to any change in protocol definition.
-
simple supply
The power supply may be derived from unregulated 15...25V DC, stabilization on board
-
signal loss
A signal loss of not more than 1s does not affect the output. This is in accordance with the
USITT standard. In case of a longer signal loss,
-
all outputs are driven down to 0V (standard), or:
-
all outputs are set to an emergency scene, or:
-
the last setting will remain intact (optional).
The board can be supplied with either setting to match your application.
-
cost-effective
The SOUNDLIGHT 3006A is a cost-effective solution for many purposes.
CONNECTORS
The DMX Demultiplexer Card 3006A consists of the following interconnections:
CN1
Universal connector (16 pin)
1
Output 0...10V Channel 1
2
Output 0...10V Channel 2
3
Output 0...10V Channel 3
4
Output 0...10V Channel 4
5
Output 0...10V Channel 5
6
Output 0...10V Channel 6
7
Output 0...10V Channel 7
8
Output 0...10V Channel 8
9
GND 0V
10
15...+25V=
11
GND 0V
12
TTL-Signal Output: /ERROR
13
-DMX Output (XLR Pin2)
14
+DMX Output (XLR Pin3)
15
-DMX Input (XLR Pin2)
16
+DMX Input (XLR Pin3)
CN2
DMX Input (XLR 5-pin)
1
GND
2
-DMX
3
+DMX
4
connected to pin 4 CN3
5
connected to pin 5 CN3
