Thank you for choosing a SOUNDLIGHT device.
The SOUNDLIGHT DMX Saftey relay 5202R-EP is an intelligent DMX decoder to convert digital
data complying with standards USITT DMX512/1990, ANSI E1-11 DMX512-A, DIN 56930-2 and
ANSI E1-20 DMX RDM into switching control signals for various purposes. The 5202R-EP can be
used with all standard lighting control systems. Its special advantages include:
-
universal protocol decoding
Recognizes all variants of the protocol as defined by USITT / ESTA / DIN
-
future-proof
The unit is software controlled an can easily be adapted to any change in
protocol definition.
-
signal feed-thru
The DMX data input is fed to DMX THRU terminals. This allows easy integration in complex
multi-device wirings.
-
simple supply
The power supply is from standard voltage 115...230VAC.
-
signal loss
In the case of a loss of the drive signal a pre-definable action will be taken.
-
cost-effective
The SOUNDLIGHT 5202R-EP is a cost-effective solution for many purposes.
General
The DMX Relay 5202R-EP is ideally suited for all kinds of switching control. It has been designed
for use with effects in entertainment lighting. The 5202R-EP must not be used for hazardous appli-
cations. Certain applications may require additional safety measures (see below). The 5202R-EP
can be configured to several different modes of operation; full configuration requires use of a full-
featured DMX RDM controller (DMX RDM is a bidirectional DMX protocol defined in standard ANSI
E1-20). We recommend to use the ENTTEC RDM controller (www.enttec.com) or -preferably- the
JESE USB RDM TRI GET/SET controller (www.jese.co.uk).
Nomenclature
These symbols are used within this manual:
DANGER !
May cause harm to user and/or equipment
INFO: How to setup your device
INFO: Status information
