DMX-Universal-Demux
11
Parameter ID
Discovery
Command
SET
Command
GET
Command
ANSI/
PID
SERIAL_NUMBER
1)
PID:
0xD400
IDENTIFY_MODE
1)
PID:
0xD402
1) Manufacturer depending RDM control commands (MSC - Manufacturer Specific
Type)
Manufacturer depending RDM control commands
:
SERIAL_NUMBER
PID: 0xD400
Outputs a text description (ASCII-Text) of the device serial number.
GET
Send:
PDL=0
Receive: PDL=21 (21 Byte ASCII-Text)
IDENTIFY_MODE
PID: 0xD402
Stellt den Mode ein der mit IDENTIFY_DEVICE ausgeführt wird.
GET
Send:
PDL=0
Receive: PDL=1
(1 Byte IDENTIFY_MODE_ID)
SET
Send:
PDL=1
(1 Byte IDENTIFY_MODE_ID)
Receive: PDL=0
IDENTIFY_MODE_ID
Funktion
0
FULL Identify
All outputs switch ON / OFF simultaneously
and the status LED flashes
1
LOUD Identify
The outputs switch ON / OFF one after the
other and the status LED flashes
2
QUIET Identify
The outputs do not switch, only the status
LED flashes
