background image

 

13

          

2MCE-24P, Two Machine, Cuts Only Editor

 

 

j. 

ONE MACHINE AUDOEDIT PREVIEW FUNCTION 

 

 
1) 

Select Recorder VTR. 

 

Record mode must be Assemble or Insert. 

 
2)

 

Set the IN point by manually entering a time using the numeric keyboard. 

OR 
 

By pressing [

IN

] and marking the current tape time. 

 

3)

 

Set OPTIONAL OUT point using the same procedure as IN. 

OR 
 

Set the OPTIONAL OUT point by pressing [

SHIFT

] + [

OUT

]. 

The display will show the current PLAYER duration. 
 
Manually enter the desired duration using the numeric keypad. 

 

Press [

OUT

] to save the entered duration. 

OR

 

 
Press [

ESC

] to exit without saving the entered duration. 

 
4) Press 

[

SHIFT

] + [

AUTOEDIT

]. 

 

The machine will preroll to the IN Point. 

 

The second line of the display will show “Prerolling---.” 

 

The machine will go into PLAY mode.  

 
 

At the IN point, the record ready channels will go into EE mode. 

 

The second line of the display shows “Autoedit---.” 

 
 

At the OUT Point, the record ready channels will go into playback mode. 

 
5) Press 

[

STOP

] at anytime to abort the Preview. 

 

Summary of Contents for 2MCE-24P




















Reviews: