Installation guide
2
dnp Supernova™
Flex Classic
Safety instructions
Important Safety Instructions (EN)
>
Read the instructions
>
Keep the instructions
>
Heed all warnings
>
Follow all instructions
>
Clean only with dry cloth
>
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions
>
Do not defeat the safety purpose of the grounding-type plug. A grounding type plug has two blades and a third grounding
prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet
>
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where
they exit from the apparatus
>
Unplug this apparatus during lightning storms or when unused for long periods of time
>
WARNING!
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not operate screen
before it is installed on wall
>
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed
on the apparatus
>
Follow all installation instructions. Incorrect installation can lead to severe injury and/or permanent product damage and will
invalidate the dnp warranty
>
Be sure that the wall studs or other mounting fixtures are suitable for mounting the screen
>
Be sure that the screen is mounted correctly and securely to the wall or the dnp warranty will be invalidated
>
If the mains plug, extension cord, appliance inlet or power strip is used as the disconnect device, the disconnect device must
remain readily operable
>
The screen is a class I construction and shall be connected to a mains socket outlet with protective earthing connection. Do not
install without a ground connection
>
Do not pull or tug on screen when mounted on wall
>
Do not restrict the screen from moving
>
Do not scratch or bend screen material during handling
>
Operate within specified temperature and humidity range (see section I)
>
Do not attempt to disassemble any part of the screen (electric shock hazard)
>
Do not permit children to play with screen controls
>
Examine the screen for imbalance or signs of wear during operation. If needed, adjust before operating
