manualshive.com logo in svg

DNP Supernova Flex Classic, Installation Manual

The DNP Supernova Flex Classic Installation Manual can be easily downloaded for free from 88.208.23.73:8080. This comprehensive manual provides step-by-step instructions to ensure a seamless installation process. Download your copy now to effortlessly set up your DNP Supernova Flex Classic and start enjoying its impressive features.

Share
Download
background image

Installation guide

9

dnp Supernova™ 

Flex Classic

3. 

Attach the screen case to the ceiling by sliding Plate.B (mounted on the screen case) onto Plate.A (mounted on the ceiling).

  

Install Screw.G and tighten securely.

 

4. 

Install two safety wires with the safety screws into Plate.C and into the ceiling with Screw.F or other appropriate screw. 

Front

Plate.A

Screen case

Plate.A

Screw.F

Slide

Plate.B

Safety wire

Ceiling

Ceiling

Screw.G

Safety screw

Screw.F

Front

Plate.A

Screen case

Plate.A

Screw.F

Slide

Plate.B

Safety wire

Ceiling

Ceiling

Screw.G

Safety screw

Screw.F

Use other safety screw
to fixate Plate.C.

Plate.C

Screen case

Safety screws

Safety wire

Summary of Contents for Supernova Flex Classic
















Reviews:

No comments

Related manuals for Supernova Flex Classic

Turning Technologies DualBoard User Manual preview
DualBoard
Brand: Turning Technologies Pages: 27
Touchboards PolyVision Installation And Operation Manual preview
PolyVision
Brand: Touchboards Pages: 63

Brands by name

Popular brands

Load more brands