- 20 -
repeat the current folder
Shuffle
Store Frequencies as a favorite
Setup the frequency. (page 17
Setup
fequency)
Press briefly the
MEM/SCAN
button. The
display shows [-].
Press the
/
-buttons to select a
memory adress(1-4).
Press briefly the
MEM/SCAN
button once
again.
Restore Frequencies
Press repeately the
MEM/SCAN
button. until the desired
frequency is shown in the display.
Adjust audio input level (Audio in)
In order to have the best signal quality, it is necessary to adjust
the volume of the connected audio device. Follow the below
guideline:
Start playback of the audio device. Adjust the volume to a low
level. Now increase the level until the noise disapears. Keep
the level in mind. Increase the level until a distortion is heard
in the radio. Keep also this level in mind. Now adjust the volume
level to the middle of these 2 values, which you have deter-
mined.
MFlysiSelect DEFNcs4.indd 20
05.07.2010 08:56:04