23
7. After having calibrated the RV, keeping the screw still with the Allen wrench, screw the
nut of 13 blocking the RV screw in the desired position. The adjustment is completed.
8. Remove the tester and pressure gauge from hoses and power pack.
HYDRAULIC TESTER
FOR MEASURING THE VALUES OF:
PRESSURE – BACK PRESSURE –
FLOW AND INTERACTION OF THESE
VALUES
POWER PACK CLEANING
A regular cleaning is very important for the good functioning of the equipment. A clean product
will immediately allow to find oil leaks or causes of malfunctioning. A clean tool is also more
comfortable to use and guarantees a firm grip.
CLEANING WITH HYDRO CLEANER
THESE INSTRUCTIONS REFER ONLY TO THE ASPID AND RAPTOR MODELS, WHICH ARE NOT
EQUIPPED WITH CURRENT GENERATOR – DO NOT WASH WITH HYDROCLEANER THE
GENERATOR OF THE MANTA POWER PACK. THE MAINTENANCE OF THE MANTA POWER PACK
IS DESCRIBED IN THE FOLLOWING PARAGRAPH
•
The cleaning with hydro cleaner assures the best results in this type of washing. Put the
power pack on a clean surface or a wooden pallet. Be careful not to use too much the water
nozzle near the tool to avoid the removal of safety stickers and paint, in particular if hot water
is used.
•
A hot washing with very high pressure and with the nozzle very close to the surfaces,
can cause the removal of the paint and safety adhesives and labels
•
Do not insist on the engine electric part with the nozzle – if it is necessary read on the
proper paragraph about cleaning contained in the motor manufacturer’s manual.