I
NSTRUCTION
&
P
ARTS
M
ANUAL
Pag.
33
Edition A
15.2.4 Blade tension assembly
Blade tension assembly Dwg. 210/16
Pos.
Tool
Adjust the guide track
Spanner
Check locknut
03-052
Do not regulate the central screw of the blade tension guide
15.2.5 Band drive assembly
Band drive assembly dwg. 210/03
Pos.
Tool
Check the electrical motor
03-001
Check the collect locking that connect the wheel to the reducer shaft
03-043
Check belts
03-019
15.2.6 Guide arms
Check guide arms dwg. 210/05
Pos.
Tool
Check carbide inserts
05-045
When changing the blade, clean the inserts with gasoline
Check, and if necessary replace, the guiding ball bearings and the guide-arm inserts
05-023
05-026-029
Check and rotate the carbide backer
17-003
15.2.7 Band brush assembly
Band brush assembly dwg. 210/20
Pos.
Tool
Check and if necessary replace the band brush
20-014
Spanner
Register the brush so to keep the blade teeth always clean
15.2.8 Wheels
Wheel. 03-042-0
Pos.
Tool
Check the wheel adjustment
Check the blade position on the wheel. If the blade back touches the wheel, call the manu-
facturer.
03-042 Manufacturer
Check and keep clean the wheel grooves
03-042
Be sure the blade is not cutting the machine frame
03-042
Manufacturer
Keep lubricated all the bearings
03-051
15.2.9 Servo-cutting device
Servo cutting assembly Dwg. 066/17
Pos.
Tool
Check the servo-valve adjusting the cutting pressure. Turn the knob
Open the servo-valve cover and check the vertical movement of the unit.
Spanner
15.4
H
YDRAULIC POWER UNIT
Keep the pressure to 50 bar. Check the reservoir level and, if necessary, add oil type OSO46.
15.5
E
LECTRIC CONTROL PANEL
Replace, if necessary, broken components.
