©
Copyright 2002 by DOAR Communications Inc. All Rights Reserved. (800) 875-8705
15
Auxiliary Audio Connection (optional equipment)
An optional speaker can be connected to the DEPS unit using an RCA connecting
cable. Connect the RCA cable from HOUSE AUDIO OUT on the back of the DEPS
unit to the RCA input on the speaker.
15” LCD Touch screen Monitor Connection (optional
equipment)
Use one VGA cable to connect the LCD monitor to the DEPS unit. Locate VGA IN
on the back of LCD monitor. Connect one side of the VGA cable to VGA IN on the
Monitor. Connect the other side of the VGA cable to UNSWITCHED MONITOR
on the back of the DEPS unit. Use one 9 PIN connector cable to connect the 9 PIN
OUT (Monitor) to TOUCHSCREEN on the back of the DEPS unit for touch screen
annotation capabilities.
DOAR’s Illustrator
Because the Illustrator can accept multiple configurations between the tablet pad,
light pen, and annotation touch screen, the connections to the DEPS vary. The
connections are clearly labeled on the back-panel of the system.
DOAR’s Visual Image Printer
The DOAR Visual Image Printer (VIP) has been designed to provide quick, high
quality prints of your evidence. All connections are factory installed internally.
Therefore, by simply pressing “PRINT” on the Remote Control, a vivid photo of the
currently displayed item will be produced.
The VIP generates these photos by using special ink and paper. Your system may
come pre-installed with a small amount of supplies used during testing of the DEPS.
For information on installing additional supplies, please refer to page 28 of this
manual for details.
