©
Copyright 2002 by DOAR Communications Inc. All Rights Reserved. (800) 875-8705
26
Communicator Functions
Lighting
These buttons are used to turn on/off the lights. There are two lighting units. They
are as follows:
Upper
: The upper lighting unit is used for viewing materials such as printed matter
and 3-D objects.
Base:
The Base light unit is used for viewing slides, transparencies, X-rays etc.
When the lighting button is pressed, the indicator flashes, and after a
few seconds, the upper fluorescent lamps turn on. To turn the lamps
off, press the lighting button again. Select the (UPPER) or (BASE) mode.
(It is not possible to use both the upper lighting unit and
the base light). It is advisable to use the upper lighting unit to obtain a clear image
with better color rendering especially when the stage is not sufficiently lighted.
Input Selection
Input selection lets you select the input you would like to show on the monitors or to
change input line. There are three input selector options. They are as follows:
Internal
: Displays whatever is in the view of the Communicator.
AV1 & AV2
: Inputs from two separate AV sources are available to be projected on
the monitors by pressing one of the input selection buttons.
Nega/Posi Conversion
