Settings
140
✔
INFORMATION
･
When charging starts, the setting of Battery saver turns off
automatically. To use Battery saver, turn it on again after
charging.
◆
Battery optimization
To suppress battery consumption for each application, the
application is disabled when the terminal is not used or the
application is not used for several days.
1
From the Home screen,
→
[Settings]
→
[Battery]
2
[MENU]
→
[Battery optimization]
3
[Not optimized]
→
[All apps]
4
Select an app to change the setting
→
[Optimize]/[Don't optimize]
→
[DONE]
You can check the memory usage conditions of applications
installed in the terminal.
1
From the Home screen,
→
[Settings]
→
[Display/Sound/Apps]
→
[Memory]
･
By tapping [Memory used by apps], you can check the
memory usage conditions of each application.
Add a user to share the terminal with multiple users (the
function with which users and a guest can use the terminal).
Switch users or add a guest in the Panel switch (
→
The information that is necessary for emergency or your
profile information can be registered, too.
1
From the Home screen,
→
[Settings]
→
[Users]
2
Set required items
You (XXX) :
The current user. Tap to edit the user names
and icons.
(User name) :
Registered user names are displayed.
･
Set whether to permit a user to use the phone/SMS
function and delete a user by tapping
of the user
while the owner is using.
Guest :
When a guest uses the terminal, "Remove guest"
is displayed and you can remove the applications or data
that the guest used.
･
Tap
of the guest to set whether to allow the guest to
use the phone.
+ Add user :
Add an additional user.
･
The initial settings are required every time a user is
added. Set according to the instruction on the screen.
Add users :
Set whether to add a guest or users from the
notification panel on the lock screen when the security
unlock preference that requiring authentication is set.
Emergency information :
Register your blood type or
other information which is useful for initial response
when emergency, or emergency contact.
My Profile :
Setting steps
→
Memory
Users
